windows 10 shutdown后不断电问题。

xxxlmyxxx

大家好，我有一架desktop两架laptop 。desktop和一架Lenovo升级/format windows 10后都没问题。
另一架acer build-in battery的laptop就时常会有shutdown后，screen熄灭后，laptop的信息灯，keyboard灯全部都不熄灭，也就是laptop还在运行。
由于电池build-in不能拔电,通常要等到它的电耗尽再充电才能从新开机。这架acer我有上它官网check过是ready for win 10的，也已经发布win 10driver 供大众下载，就连bios也升级最新版本了。

上YouTube和Microsoft官网都有看到教程，可是看该网站下面的feeback的效果都因人而异，请问大家是否也面对这相同问题？或者有什么第三方辅助关机的software可以介绍？
来讨论讨论吧。

leokee1979

先确定是不是 windows 10 的问题
windows 7，8.1 试了吗？

xxxlmyxxx

leokee1979 发表于 27-9-2015 11:30 PM
先确定是不是 windows 10 的问题
windows 7，8.1 试了吗？

确定是win10问题，之前是win 8没这问题出现。

erik

从新format安装过windows10，完成后不要上网（因为它会自动帮你安装driver）看有没有这个断电问题。。。
如果没有的话就一个一个driver安装（装一个restart一次）看断电问题还有吗??
唯有酱才能查出是哪一个driver弄到。。。

delaciox

去把fast startup的东西关掉，因为关机是有一半是hibernate的ram越大就等越久才关玩
教程：
1. Open the Control Panel (icons view), and click on the Power Options icon.

2. Click/tap on the Choose what the power buttons do link on the left side. (see screenshot below)


3. Click/tap on the Change settings that are currently unavailable link at the top. (see screenshot below)


4. If prompted by UAC, then click/tap on Yes.

5. Do step 6 or step 7 below for what you would like to do.

6. To Turn On "Fast Startup" (Hybrid Boot) for a "Hybrid Shutdown"
NOTE: This is the default setting.

A) Under Shutdown settings, check the Turn on fast startup box, and click/tap on the Save changes button. (see screenshot below)

NOTE: If the Turn on fast startup setting is not listed, then you will need to close the System Settings window,enable hibernate, then start back at step 1 again.


B) The Shut down Power option will now perform as a hybrid shut down when used.

C) Go to step 8 below.

7. To Turn Off "Fast Startup" for a "Full Shutdown"

A) Under Shutdown settings, uncheck the Turn on fast startup box, and click/tap on the Save changes button. (see screenshot below step 6A)

NOTE: If the Turn on fast startup setting is not listed, then hibernate has been disabled that removed this setting and also disabled fast startup.

B) The Shut down Power option will now perform as a normal full shut down when used.

C) Go to step 8 below.

8. You can now close the Power Options window if you like.