免费软件集锦区，反对盗版，反对破解 [24/2更新] [125个软件了!!!]

vrz

有，有，有，我时常注意，谢谢你的介绍。

我想请问有什么软件可以一次过储存Forum的所有页数，不用一页一页copy & paste去word，因为当来到100页后，它真的是一个[工]。主题旁边的[打印]只可以save 100个回复，也就是4页吧了，不管用。

有什么网页下载软件吗？谢谢！

kennethwch

有，有，有，我时常注意，谢谢你的介绍。

我想请问有什么软件可以一次过储存Forum的所有页数，不用一页一 ...
vrz 发表于 27-9-2010 12:13 AM

原来还是有人看到
目前为止还没听说有着类型的软件，我会帮你留意。可是不一定找得到哦

cutegal88

虽然这个贴也开了一段时间也不到10个人进来留言，可是破百个软件还是一种喜悦。。。

不知道这贴对大家有 ...
kennethwch 发表于 26-9-2010 09:43 PM

我一直驾着submarine游过而已，所以你看不到我的

kennethwch

我一直驾着submarine游过而已，所以你看不到我的
cutegal88 发表于 27-9-2010 08:20 AM

    你开架邮轮进来吧，大马的潜艇不能下水的

kennethwch

CMOS De-Animator v2 is a service utility for your system's CMOS RAM. Unlike its predecessor, the CMOS De-Animator 1.0, the new version includes a graphical interface and CMOS-backup options along with the "Clear CMOS" procedure, which was the original version's only purpose. So, you can now backup the main CMOS settings to a file, or restore them later. The application supports all 32-bit and 64-bit Windows operating systems except Windows 95 and Windows NT 3.51; for these old systems, you have to use De-Animator's previous version.

Like with De-Animator 1.0, one-time activated administrator privileges are required, if the application is ran for the first time in your system. CMOS De-Animator v2 now includes a self-test on its startup to check, whether the CMOS can be successfully accessed to. After successful execution with the status "Ready to go" visible, the application can be normally used even under non-privileged accounts on your machine (i.e. under an user account). This doesn't apply to Windows 98/ME, where the utility works instantly.

What's new in version 2.0:
- Simple graphical interface with three possible actions: clear, save or restore the CMOS RAM
- Test CMOS reading at the startup, as mentioned above.
- No need to download a separate version for 64-bit systems.
- Compared with De-Animator 1.0 x86, less false-alarm messages from some picky antivirus programs

link : http://www.st-ware.com/page.php?23

by cutegal88

kohl

一向来很少登录,为了支持楼主这帖子,登录进来了,
回复了这一百零一帖,偶又潜水咯.....

kennethwch

一向来很少登录,为了支持楼主这帖子,登录进来了,
回复了这一百零一帖,偶又潜水咯.....
kohl 发表于 27-9-2010 05:15 PM

    谢谢支持，等突破125个贴后我又会继续做工了~

HiiTP

http://skwire.dcmembers.com/wb/pages/software/boot-snooze.php

网上虽然有很多号称能加快开机速度的软件，但是大部分效果都不理想，而Boot Snooze则是通过一种另类的方法（重启后自动休眠/待机）加速开机速度。

众所周知使用Windows自带的休眠/待机功能可以有效的缩减系统启动所需的时间，但是长期不重启系统会导致系统运行速度变慢，Boot Snooze则结合了重启和休眠/待机的功能，可以自动的让系统重启并休眠/待机，大大缩减了下次开机所需的时间而且也不会牺牲系统的运行速度。

下载并解压完毕后运行解压目录中的可执行文件启动Boot Snooze，首先在”after reboot”后面设置好系统重启后过多长时间后自动休眠/待机，建议设置大于5分钟。

接着点击”Restart than Hibernate”（重启后休眠）或”Restart than Standby”（重启后待机），系统就会自动重启并休眠/待机了，这时你就可以关闭显示器然后让系统自动重启并休眠/待机了。

因为待机后还是会持续消耗电力，除非是笔记本电脑，否则还是推荐使用”休眠后代机”以节省电费。

系统重启后会弹出一个对话框，如果放着不管的话它会倒数几分钟然后自动休眠/代理，你也可以点击”Perform hibernate/standby now”马上休眠/待机或点击”Abort”按钮放弃休眠/待机。

Description:  This simple app will:

   1. Give you a choice to reboot and go into standby or hibernation.
   2. It will then reboot your computer.
   3. After the reboot, a small dialog with a countdown timer will begin.
   4. After the timer is up, your computer will be put into the mode you chose.

kennethwch

网上虽然有很多号称能加快开机速度的软件，但是大部分效果都不理想，而Boot Snooze则是通过一种另类的方 ...
HiiTP 发表于 27-9-2010 11:37 PM

    暂时靠你up软件了，最近要赶大学报告，拜托拜托

bookm

下载 12.4MB By Mark Russinovich （昨日才更新）

The Sysinternals Troubleshooting Utilities have been rolled up into a single Suite of tools. This file contains the individual troubleshooting tools and help files. It does not contain non-troubleshooting tools like the BSOD Screen Saver or NotMyFault.
The Suite is a bundling of the following selected Sysinternals Utilities:

详见：http://technet.microsoft.com/en-my/sysinternals/bb842062(en-us).aspx

kennethwch

12.4MB By Mark Russinovich （昨日才更新）

The Sysinternals Troubleshooting Utilities have been  ...
bookm 发表于 30-9-2010 08:50 PM

    属于一键修复的类型吗？谢谢分享~

bookm

属于一键修复的类型吗？谢谢分享~
kennethwch 发表于 30-9-2010 10:20 PM

    不好意思，我没用过，只知道他们的产品很可靠（不然不会被Microsoft收购）。

可以说许多他们的小程序都被捆绑在一个压缩包里，省却了个别下载的烦恼。

那12.4MB包含以下：

The entire set of Sysinternals Utilities rolled up into a single download.
AccessChk
v5.0 (April 28, 2010)
AccessChk is a command-line tool for viewing the effective permissions on files, registry keys, services, processes, kernel objects, and more.
AccessEnum
1.32 (November 1, 2006)
This simple yet powerful security tool shows you who has what access to directories, files and Registry keys on your systems. Use it to find holes in your permissions.
AdExplorer
v1.42 (July 29, 2010)
Active Directory Explorer is an advanced Active Directory (AD) viewer and editor.

AdInsight
v1.01 (November 20, 2007)
An LDAP (Light-weight Directory Access Protocol) real-time monitoring tool aimed at troubleshooting Active Directory client applications.
AdRestore
v1.1 (November 1, 2006)
Undelete Server 2003 Active Directory objects.
Autologon
v3.0 (June 23, 2010)
Bypass password screen during logon.
Autoruns
v10.03 (September 29, 2010)
See what programs are configured to startup automatically when your system boots and you login. Autoruns also shows you the full list of Registry and file locations where applications can configure auto-start settings.
BgInfo
v4.16 (October 1, 2009)
This fully-configurable program automatically generates desktop backgrounds that include important information about the system including IP addresses, computer name, network adapters, and more.
BlueScreen
v3.2 (November 1, 2006)
This screen saver not only accurately simulates Blue Screens, but simulated reboots as well (complete with CHKDSK), and works on Windows NT 4, Windows 2000, Windows XP, Server 2003 and Windows 9x.
CacheSet
v1.0 (November 1, 2006)
CacheSet is a program that allows you to control the Cache Manager's working set size using functions provided by NT. It's compatible with all versions of NT.
ClockRes
v2.0 (June 4, 2009)
View the resolution of the system clock, which is also the maximum timer resolution.
Contig
v1.55 (September 30, 2008)
Wish you could quickly defragment your frequently used files? Use Contig to optimize individual files, or to create new files that are contiguous.
Coreinfo
v2.11 (May 21, 2010)
Coreinfo is a new command-line utility that shows you the mapping between logical processors and the physical processor, NUMA node, and socket on which they reside, as well as the cache’s assigned to each logical processor.
Ctrl2cap
v2.0 (November 1, 2006)
This is a kernel-mode driver that demonstrates keyboard input filtering just above the keyboard class driver in order to turn caps-locks into control keys. Filtering at this level allows conversion and hiding of keys before NT even "sees" them. Ctrl2cap also shows how to use NtDisplayString() to print messages to the initialization blue-screen.
DebugView
v4.76 (October 16, 2008)
Another first from Sysinternals: This program intercepts calls made to DbgPrint by device drivers and OutputDebugString made by Win32 programs. It allows for viewing and recording of debug session output on your local machine or across the Internet without an active debugger.
Desktops
v1.02 (January 19, 2010)
This new utility enables you to create up to four virtual desktops and to use a tray interface or hotkeys to preview what’s on each desktop and easily switch between them.
Disk2vhd
v1.62 (July 29, 2010)
Disk2vhd simplifies the migration of physical systems into virtual machines (p2v).
DiskExt
v1.1 (May 14, 2007)
Display volume disk-mappings.
Diskmon
v2.01 (November 1, 2006)
This utility captures all hard disk activity or acts like a software disk activity light in your system tray.
DiskView
v2.4 (March 25, 2010)
Graphical disk sector utility.
Disk Usage (DU)
v1.34 (May 19, 2010)
View disk usage by directory.
EFSDump
v1.02 (November 1, 2006)
View information for encrypted files.
Handle
v3.42 (November 19, 2008)
This handy command-line utility will show you what files are open by which processes, and much more.
Hex2dec
v1.0 (November 1, 2006)
Convert hex numbers to decimal and vice versa.
Junction
v1.06 (September 8, 2010)
Create Win2K NTFS symbolic links.

待续……。

bookm

............续上

LDMDump
v1.02 (November 1, 2006)
Dump the contents of the Logical Disk Manager's on-disk database, which describes the partitioning of Windows 2000 Dynamic disks.

ListDLLs
v2.25 (November 1, 2006)
List all the DLLs that are currently loaded, including where they are loaded and their version numbers. Version 2.0 prints the full path names of loaded modules.

LiveKd
v4.0 (April 28, 2010)
Use Microsoft kernel debuggers to examine a live system.

LoadOrder
v1.0 (November 1, 2006)
See the order in which devices are loaded on your WinNT/2K system.

LogonSessions
v1.21 (May 6, 2010)
List the active logon sessions on a system.

MoveFile
v1.0 (November 1, 2006)
Allows you to schedule move and delete commands for the next reboot.

NTFSInfo
v1.0 (November 1, 2006)
Use NTFSInfo to see detailed information about NTFS volumes, including the size and location of the Master File Table (MFT) and MFT-zone, as well as the sizes of the NTFS meta-data files.

PageDefrag
v2.32 (November 1, 2006)
Defragment your paging files and Registry hives.

PendMoves
v1.1 (November 1, 2006)
Enumerate the list of file rename and delete commands that will be executed the next boot.

PipeList
(November 1, 2006)
Displays the named pipes on your system, including the number of maximum instances and active instances for each pipe.

PortMon
v3.02 (November 1, 2006)
Monitor serial and parallel port activity with this advanced monitoring tool. It knows about all standard serial and parallel IOCTLs and even shows you a portion of the data being sent and received. Version 3.x has powerful new UI enhancements and advanced filtering capabilities.

ProcDump
v2.01 (September 29, 2010)
This new command-line utility is aimed at capturing process dumps of otherwise difficult to isolate and reproduce CPU spikes. It also serves as a general process dump creation utility and can also monitor and generate process dumps when a process has a hung window or unhandled exception.

Process Explorer
v12.04 (June 8, 2010)
Find out what files, registry keys and other objects processes have open, which DLLs they have loaded, and more. This uniquely powerful utility will even show you who owns each process.

Process Monitor
v2.93 (September 29, 2010)
Monitor file system, Registry, process, thread and DLL activity in real-time.

ProcFeatures
v1.10 (November 1, 2006)
This applet reports processor and Windows support for Physical Address Extensions and No Execute buffer overflow protection.

PsExec
v1.98 (April 28, 2010)
Execute processes on remote systems.

PsFile
v1.02 (December 4, 2006)
See what files are opened remotely.

PsGetSid
v1.44 (April 28, 2010)
Displays the SID of a computer or a user.

PsInfo
v1.77 (April 28, 2010)
Obtain information about a system.

PsKill
v1.13 (December 1, 2009)
Terminate local or remote processes.

PsList
v1.28 (April 28, 2010)
Show information about processes and threads.

PsLoggedOn
v1.33 (April 28, 2010)
Show users logged on to a system.

PsLogList
v2.71 (April 28, 2010)
Dump event log records.

PsPasswd
v1.22 (December 4, 2006)
Changes account passwords.

PsService
v2.24 (April 28, 2010)
View and control services.

PsShutdown
v2.52 (December 4, 2006)
Shuts down and optionally reboots a computer.

PsSuspend
v1.06 (December 4, 2006)
Suspend and resume processes.

PsTools
(July 1, 2009)
The PsTools suite includes command-line utilities for listing the processes running on local or remote computers, running processes remotely, rebooting computers, dumping event logs, and more.

RAMMap
v1.1 (June 23, 2010)
An advanced physical memory usage analysis utility that presents usage information in different ways on its several different tabs.

RegDelNull
v1.10 (November 1, 2006)
Scan for and delete Registry keys that contain embedded null-characters that are otherwise undeleteable by standard Registry-editing tools.

RegJump
v1.01 (November 1, 2006)
Jump to the registry path you specify in Regedit.

RootkitRevealer
v1.71 (November 1, 2006)
Scan your system for rootkit-based malware.

SDelete
v1.51 (November 1, 2006)
Securely overwrite your sensitive files and cleanse your free space of previously deleted files using this DoD-compliant secure delete program.

ShareEnum
v1.6 (November 1, 2006)
Scan file shares on your network and view their security settings to close security holes.

ShellRunas
v1.01 (February 28, 2008)
Launch programs as a different user via a convenient shell context-menu entry.

Sigcheck
v1.7 (Jun 8, 2010)
Dump file version information and verify that images on your system are digitally signed.

Streams
v1.56 (April 27, 2007)
Reveal NTFS alternate streams.

Strings
v2.41 (March 2, 2009)
Search for ANSI and UNICODE strings in binaryimages.

Sync
v2.0 (November 1, 2006)
Flush cached data to disk.

TCPView
v3.02 (August 2, 2010)
Active socket command-line viewer.

VMMap
v2.62 (March 25, 2010)
VMMap is a process virtual and physical memory analysis utility.

VolumeId
v2.0 (November 1, 2006)
Set Volume ID of FAT or NTFS drives.

Whois
v1.01 (November 1, 2006)
See who owns an Internet address.

WinObj
v2.21 (September 13, 2010)
The ultimate Object Manager namespace viewer is here.

ZoomIt
v4.1 (October 21, 2009)
Presentation utility for zooming and drawing on the screen.

MindTeaser

我个人觉得楼主应该整理一下软件归类了

kennethwch

我个人觉得楼主应该整理一下软件归类了
MindTeaser 发表于 1-10-2010 01:59 AM

   数量达150后我就整理了，谢谢你的提醒

kennethwch

............续上
bookm 发表于 30-9-2010 10:29 PM

    好多东西哦，看来要慢慢研究咯

bookm

好多东西哦，看来要慢慢研究咯
kennethwch 发表于 1-10-2010 09:48 PM

    我记得我用过当中的BGInfo.EXE，HiiTP用过Autoruns，真的还有其他很多个没有试过，相信都很有用处。

HiiTP

Get it Free. A free version of Debut video cature software is available for non-commercial use only. If you will be using Debut at home you can download the free version here.
Debut is designed to be very easy and intuitive to use, giving you the ability to record essentially anything from capturing video from a webcam, your screen, or video input devices such as a VHS recorder within minutes of downloading.

Debut 是一个简单易用的视频录制工具，可以捕捉你的屏幕和摄像头,而且操作非常简单，您只要事先设定好您要录制的档案格式、画面大小、影格速度 (FrameRate)等，在按下录制纽即可，支援的格式有MP4、3GP、AVI、WMV、ASF、MOV、MPG，还可以调整撷取影像亮度、对比等等，这对想要录制教学影片或教材的使用者非常方便(zsh)



下载点
http://www.nchsoftware.com/capture/index.html
http://www.nchsoftware.com/capture/debutsetup.exe

HiiTP

Game Protector protects any games with a password and when any user tries to open game it prompts for a password, so that only you can launch it. Game Protector lets you protect Game on your own PC, protect games executable files from unauthorized runs both on your computer, and even when you copy it to other computers.
Game Protector is one completely freeware from www.gameprotector.com, it is FREE for individual and not-for-profit charitable entity use. This free software is very easy to use, the program interface is friendly, password protect adding and removing is very simple. This software can work fine with Windows Vista.

小贴士:执行Game Protector给程序加密操作时，要记得先把指定软件完全关闭，否则无法正常执行。

不少办公用户的电脑中存储了非常重要的资料，如果这些资料遗失，后果非常严重。但很多时候办公电脑都会有几个同事一起使用，针对这种情况，小编推荐用Game Protector把私密的程序都锁起来。如果要运行必须输入正确的密码。这样再不必担心自己的重要资料会被偷窥和遗失了。

step01选择加密程序
启动Game Protector，在主界面中先点击“Open”选择想要使用加密机制运行的程序，再在下面的“Password”栏中输入密码。为了让日后还有机会可以还原成原始状态，还要勾寻Create Backup”复选框，备份源程序。最后点击“Protect”按钮使设置升效。

step02运行加密软件
加密完成后，再次启动该程序，此时会弹出“Password”对话框，输入正确的密码并确认后，才能正常启动程序。否则，将弹出“Please input one Password.”（请输入一个密码）的提示对话框，无法进入程序。

step03解除锁定状态
如果需要解除某个程序的启动密码。打开Game Protector后，仍是点击“Open”按钮选择指定程序，并输入预设的密码。之后，点击界面左下端的“UnProtect”按钮，即可解除锁定，不过这步可要小心，别让你想限制使用的人看到了哦。
(责任编辑：来自网络)

下载点
http://www.gameprotector.com/

HiiTP

StickyPad is an invaluable, easy-to-use tool that lets you place sticky notes on your desktop. You can type notes to yourself, set meeting and appointment reminders, keep track of a to-do list, and anything else you would do with paper notes. Your notes can be printed, pasted into other applications, or emailed to coworkers. You can even make notes translucent and have them float above your other windows, so you can see both your note and what you are working on. When you log off, StickyPad remembers all of your notes, and when you log back on, your notes are still there. Once you try it, you won't want to work without StickyPad again.

The new version of StickyPad adds some great new features, such as shortcut keys, so you can write sticky notes from any Windows application without using the mouse, a great time-saver for keyboard jockeys. The latest version also sports a help system in case you get lost, an updated appearance, and shadows, a great new visual effect.

Note: StickyPad works best for English and other Western European languages. Certain other languages, especially East Asian languages, do not work well with StickyPad on some computers.


StickyPad是一个很美观的桌面便利贴软件，直觉的使用方式跟真实的便利贴没什么两样。使用软件取代纸质便利贴的好处之一就是能让工作环境变的更整洁，屏幕或是办公桌上不会因为到处贴满了便利贴而变的淩乱。




下载点
http://www.greeneclipse.com/stickypad.html
http://www.greeneclipse.com/download/Install%20StickyPad.exe